介電常數高頻測試儀

介電常數高頻測試儀Q合格指示預置功能：預置范圍：5～1000

   6．Q表正常工作條件

   a. 環境溫度：0℃～+40℃；

  b．相對濕度：<80％；

  c．電源：220V±22V，50Hz±2.5Hz。

   7．其他

  a．消耗功率：約25W；

   b．凈重：約7kg；

   c.外型尺寸：（寬×高×深）mm：380×132×280。

介電常數高頻測試儀維修

1．新購儀器的檢查

新購的儀器能先用LKI-1電感組，將各個電感在各個不同頻率測試Q值，把測試的情況，例使用的電感號、測試頻率Q讀數、電容讀數等多次測得數及測試環境條件逐一詳細記錄，并把記錄保存起來，以供以后維修時作參考。

LKI-1電感組是測試時作輔助電感用的，不能把這些電感當作高精度的標準電感看待。隨著測試環境條件不同，測得電感器Q值和分布電容可能略有不同。

2．使用和保養

高頻Q表是比較精密的阻抗測量儀器，在合理使用和注意保養情況下，才能保證長期穩定和較高的測試精度。

a．熟悉本說明書，正確地使用儀器；

b．使儀器經常保持清潔、干燥；

c．本儀器保用期為18個月，如發現機械故障或失去準確度，可以原封送回本廠，免費修理。

主要技術特性：介質損耗和介電常數是各種電瓷、裝置瓷、電容器等陶瓷，還有復合材料等的一項重要的物理性質，通過測定介質損耗角正切tanδ及介電常數(ε)，可進一步了解影響介質損耗和介電常數的各種因素，為提高材料的性能提供依據；儀器的基本原理是采用高頻諧振法，并提供了，通用、多用途、多量程的阻抗測試。它以單片計算機作為儀器的控制，測量核心采用了頻率數字鎖定，標準頻率測試點自動設定，諧振點自動搜索，Q值量程自動轉換，數值顯示等新技術，改進了調諧回路，使得調諧測試回路的殘余電感減至zui低，并保留了原Q表中自動穩幅等技術，使得新儀器在使用時更為方便，測量值更為精確。儀器能在較高的測試頻率條件下，測量高頻電感或諧振回路的Q值，電感器的電感量和分布電容量，電容器的電容量和損耗角正切值，電工材料的高頻介質損耗，高頻回路有效并聯及串聯電阻，傳輸線的特性阻抗等。

電感器：

按測試頻率要求，需要配置不同量的電感器。

例如：在1MHz測試頻率時，要配250μH電感器，在50MHz測試頻率時，要配0.1μH電感器等。

特點： 

◎ 本公司創新的自動Q值保持技術，使測Q分辨率至0.1Q，使tanδ分辨率至0.00005 。

◎ 能對固體絕緣材料在10kHz～120MHz介質損耗角(tanδ)和介電常數(ε)變化的測試。

◎ 調諧回路殘余電感值低至8nH，保證100MHz的(tanδ)和(ε)的誤差較小。

◎ 特制LCD屏菜單式顯示多參數：Q值，測試頻率，調諧狀態等。

◎ Q值量程自動/手動量程控制。

◎ DPLL合成發生1kHz～60MHz, 50kHz～160MHz測試信號。獨立信號   源輸出口，所以本機又是一臺合成信號源。

◎ 測試裝置符合國標GB/T 1409-2006,美標ASTM D150以及IEC60250規范要求。

電感測量

a．測量范圍：0.1μH～1H。

b．分 檔：分七個量程。

0.1～1μH， 1～10μH， 10～100μH，

0.1～lmH， 1～10mH， 10～100mH， 100 mH～1H。

振蕩頻率

a．振蕩頻率范圍：25kHz～50MHz；

b．頻率分檔：

25～74kHz， 74～213kHz， 213-700kHz， 700kHz～1.95MHz，

1.95MHz～5.2MHz， 5.2MHz～17MHz， 17～50MHz。

c．頻率誤差：2×10±1個字。

Q合格指示預置功能，預置范圍：5～999。

是各種電瓷、裝置瓷、電容器等陶瓷，還有復合材料等的一項重要的物理性質，通過測定介質損耗角正切tanδ及介電常數（ε），可進一步了解影響介質損耗和介電常數的各種因素，為提高材料的性能提供依據；儀器的基本原理是采用高頻諧振法，并提供了，通用、多用途、多量程的阻抗測試。它以單片計算機作為儀器的控制，測量核心采用了頻率數字鎖定，標準頻率測試點自動設定，諧振點自動搜索，Q值量程自動轉換，數值顯示等新技術，改進了調諧回路，使得調諧測試回路的殘余電感減至zui低，并保留了原Q表中自動穩幅等技術，使得新儀器在使用時更為方便，測量值更為精確。儀器能在較高的測試頻率條件下，測量高頻電感或諧振回路的Q值，電感器的電感量和分布電容量，電容器的電容量和損耗角正切值，電工材料的高頻介質損耗，高頻回路有效并聯及串聯電阻，傳輸線的特性阻抗等。該儀器用于科研機關、學校、工廠等單位對無機非金屬新材料性能的應用研究。

Dielectric constant high frequency tester ualified preset functions indicated: preset range: 5 ~ 1000 
 
6. Q meter normal working conditions 
 
A. ambient temperature: 0 ℃ ~ + 40 ℃; 
 
B. relative humidity: < 80%; 
 
C. power: 220 v + 22 v, 50 Hz + / - 2.5 Hz. 
 
7. Other 
 
A. consumed power: about 25 w; 
 
B. Net weight: about 7 kg; 
 
C. appearance size (width x height x mm deep) : 380 * 132 * 132. 
 
 
 
 
 
Dielectric constant high frequency test instrument maintenance 
 
1. The new instrument examination 
 
New instrument is best can use first inductance LKI - 1 set, each inductance Q value in different frequency test, the test case, example USES the inductance number, test frequency Q reading, it will take many times test and test environment, such as the capacitance reading each detail records, and keep the record, for later maintenance for reference. 
 
Standalone inductance LKI - 1 set of test used as auxiliary inductor, cannot put these inductance as a high precision standard inductance. As different test environment conditions, the measured inductor Q value and distributed capacitance may be slightly different. 
 
2. The use and maintenance 
 
Frequency of Q is the impedance of the precision measuring instruments, under the condition of reasonable use and pay attention to maintenance, to ensure the long-term stability and high precision. 
 
A. Be familiar with this manual, the proper use of the instrument; 
 
B. make often maintain clean, dry instrument; 
 
C. the instrument warranty period for 18 months, such as mechanical failure or loss of accuracy, can be intact back to our factory, repair free of charge. 
 
 
 
 
 
Dielectric constant high frequency tester is the main technical features: the dielectric loss and dielectric constant is a device of electric porcelain, porcelain, capacitor, such as ceramic, and composite materials such as one of the important physical properties, by measuring dielectric loss Angle tangent tan delta and dielectric constant (epsilon), can further understand the various factors influencing the dielectric loss and dielectric constant, provide the basis for improve the performance of materials; Instrument is the basic principle of the high frequency resonance method, and provides, general, multi-purpose, multiscale impedance test. It in a single chip computer as control instrument, frequency measuring core with the digital lock, standard frequency test point set automatically, automatic resonance point search, Q value range automatic conversion, numerical display new technology, such as improved tuning loop, the tuning test circuit minimizes the residual inductance, and keep the original Q table automatic painting techniques, makes the new instrument when use more convenient, more accurate measurements. Instrument can under the condition of high test frequency, measuring the high frequency inductive or Q value of resonance loop, inductance and distributed capacitance of inductance and capacitance of capacitor and loss tangent value, electrical material of dielectric loss at high frequency, high frequency circuit effectively in parallel and series resistance, the characteristic impedance of a transmission line, etc. 
 
 
 
 
 
 
 
Dielectric constant of high frequency tester inductors: 
 
According to the test frequency requirements, need to configure the different amount of inductors. 
 
For example: in the 1 MHZ test frequency, with 250 mu H inductors, in 50 MHZ test frequency, it is only 0.1 mu H inductors, etc. 
 
 
 
 
 
Dielectric constant of the high frequency characteristic tester: 
 
Does the company Q value automatically maintain technology innovation, to 0.1 resolution, and make the tan delta resolution to 0.00005. 
 
When can of solid insulation in 10 KHZ ~ 120 MHZ dielectric loss Angle (tan delta) and the change of dielectric constant (epsilon) test. 
 
When residual low inductance tuned circuits to eight nh, to ensure that the 100 MHZ (tan delta) and smaller (epsilon) error. 
 
Have special LCD menu display more parameters: Q value, test frequency and tuning state, etc. 
 
Q value range automatic/manual control. 
 
Does DPLL synthesis occur 1 KHZ ~ 60 MHZ, 50 KHZ ~ 160 MHZ test signal. Independent signal source output, so this machine is an synthetic signal source. 
 
Have test equipment in accordance with GB/T 1409-2006, American standard ASTM D150 and IEC60250 specification requirements. 
 
 
 
 
 
Dielectric constant of high frequency tester inductance measurement 
 
A. measuring range: 0.1 mu H ~ 1 H. 
 
B. points file: seven range. 
 
0.1 ~ 1 mu H, 1 ~ 10 mu H, 10 ~ 100 mu H, 
 
0.1 lmH, 1 ~ 10 mH, 10 ~ 100 mH, mH 100 ~ 1 h. 
 
 
 
 
 
Dielectric constant of high frequency tester oscillation frequency 
 
A. oscillation frequency range: 25 KHZ ~ 50 MHZ; 
 
B. the frequency step: 
 
25 ~ 74 KHZ, 74 ~ 213 KHZ, 213-700 KHZ, 700 KHZ to 1.95 MHz, 
 
1.95 MHz to 5.2 MHz and 5.2 MHz ~ 17 MHz, 17 ~ 50 MHz. 
 
C. frequency error: 2 x 10 + 1 word. 
 
ualified preset functions indicated, preset range: 5 ~ 999. 
 
 
 
 
 
 
 
Dielectric constant high frequency meter is a device of electrical porcelain, porcelain, capacitor, such as ceramic, and composite materials such as one of the important physical properties, by measuring dielectric loss Angle tangent tan delta and dielectric constant (epsilon), to further understand the various factors influencing the dielectric loss and dielectric constant, provide the basis for improve the performance of materials; Instrument is the basic principle of the high frequency resonance method, and provides, general, multi-purpose, multiscale impedance test. It in a single chip computer as control instrument, frequency measuring core with the digital lock, standard frequency test point set automatically, automatic resonance point search, Q value range automatic conversion, numerical display new technology, such as improved tuning loop, the tuning test circuit minimizes the residual inductance, and keep the original Q table automatic painting techniques, makes the new instrument when use more convenient, more accurate measurements. Instrument can under the condition of high test frequency, measuring the high frequency inductive or Q value of resonance loop, inductance and distributed capacitance of inductance and capacitance of capacitor and loss tangent value, electrical material of dielectric loss at high frequency, high frequency circuit effectively in parallel and series resistance, the characteristic impedance of a transmission line, etc. The equipment is used for scientific research organs, schools, factories and other units on the properties of inorganic nonmetal materials applied research.