耐介電強度擊穿試驗儀

耐介電強度擊穿試驗儀產品特點

1、運行于WIN  XP/WIN7/WIN8系統下的獨立安裝軟件，界面友好，操作簡單

2、實驗顯示曲線，數據自動儲存，自動查找

3、多種用途可以進行交、直流試驗試驗準確、可靠、安全

4、計算機控制試驗過程，自動判斷停止，自動復位

5、超壓、過流、短路、漏電、誤操作等多種保護

耐介電強度擊穿試驗儀滿足標準：

GB1408-2006 GB/T1695-2005 GB/T3333  HG/T3330 /GB12656 /ASTM D149 .

      GB1408-2006 絕緣材料電氣強度試驗

      GB/T1695-2005 硫化橡膠工頻電壓擊穿強度和耐電壓強度試驗

      GB/T3333 電纜紙工頻電壓擊穿試驗

      HG/T 3330絕緣漆漆膜擊穿強度測定

      GB12656 電容器紙工頻電壓擊穿試驗

       ASTM D149 固體電絕緣材料在工業電源頻率下的介電擊穿電壓和介電強度試驗

主機尺寸：長寬高-800*700*1600（MM）

操作臺尺寸：長寬高-800*700*650（MM）

防護罩材質：白色透明有機玻璃

油槽尺寸：長寬高-300*200*150

設備重量：約100KG

技術指標：

01、輸入電壓： 交流 220 V

02、輸出電壓： 交流 0--100 KV ;

               直流 0—100 KV

03、電器容量： 10KVA

04、高壓分級： 0-100KV

05、升壓速率：0.01-5.0kv

              （備注：滿足標準要求并可以根據用戶需求設定不同的升壓速率）

注意事項：

●本儀器試驗過程中如空氣相對濕度大于70%，兩電極間空氣放電的距離會增加很多，所以試驗中請與儀器保持1.2米的距離。

●本儀器之控制計算機專為電壓擊穿試驗機設計，請勿隨意添加和刪除程序或移作它用。

●本公司保留對設備改進的權利，并不另行通知用戶。

安全保護功能：

◆ 試驗在試驗箱中進行，試驗箱門打開時電源加不到高壓變壓器輸入端，即高壓側無電壓。

100KV測試設備高壓電極距離試驗箱壁的zui近距離大于370mm，50KV測試設備高壓電極距離試驗箱壁的zui近距離大于250mm，試驗時即使人接觸箱壁也不會有危險。

◆ 設備要安裝單獨的保護地線。

接保護地線，主要是減少試樣擊穿時對周圍產生的較強的電磁干擾。也可避免控制計算機失控。

◆ 該試驗設備的電路設有多項保護措施，

主要有：過流保護、失壓保護、漏電保護、短路保護、直流試驗放電報警等。

◆直流試驗放電報警功能:在設備做完直流試驗時,當開啟試驗門時設備會自動報警,直至使用設備上的放電裝置放電后報警會自動取消.

(注：因為直流試驗后不放電會危險到人身安全,不能直接拿取電極,起到提醒使用人員放電以免造成人身傷害)。

◆ 試驗放電裝置，隨主機為一體化，改進了以往單獨配備一根放電桿的功能。

Product features

1, run on Windows XP/Windows 7 / doing under the system of independent software installation, friendly interface, easy to operate

2, experiments show that curve, data storage automatically, automatic search

3, a variety of utility can be ac and dc test experiment was carried out accurate, reliable and safe

4, the computer control test process, automatic stop, automatic reset

5, overpressure, over current, short circuit, leakage, wrong operation and so on the many kinds of protection

Dielectric breakdown strength tester meet standard:

GB1408-2006 GB/T1695-2005 GB/T3333 HG/T3330 / GB12656 / ASTM D149.

Insulation dielectric strength test GB1408-2006

GB/T1695-2005 rubber breakdown strength and power frequency voltage withstand voltage strength test

GB/T3333 cable ZhiGong frequency voltage breakdown test

HG/T 3330 insulating varnish film breakdown strength measurement

GB12656 ZhiGong frequency capacitor voltage breakdown test

ASTM D149 solid electrical insulating materials in the industrial power frequency of dielectric breakdown voltage and dielectric strength test

Host size: dimensions - 800 * 700 * 700 (MM)

Work station size: dimensions - 800 * 700 * 700 (MM)

Shield material: white transparent organic glass

Tank size: dimensions - 300 * 200 * 150

Weight: about 100 kg

Dielectric breakdown strength tester technical indicators:

01, input voltage: ac 220 V

02, output voltage: communication 0-100 KV;

Dc 0-100 KV

03, electric capacity: 10 kva

04, high-pressure sizing: 0-100 kv

05, pressure rise rate: 0.01 to 5.0 kv

(note: meet the standard requirements and can be set according to user requirements of different rate of pressure rise)

Dielectric breakdown strength tester to note:

When the instrument test such as air relative humidity is more than 70%, in the process of air discharge distance between two electrodes increases a lot, so test instrument to keep a distance of 1.2 meters.

When the instrument is specially designed for the control of computer breakdown voltage tester design, please do not add and remove programs or for it.

The company reserves the right to equipment improvement, did not notice the user.

Dielectric breakdown strength tester safety protection function:

In pieces in the test chamber test, the power supply when the door is open and not high voltage transformer input, namely high side no voltage.

100 kv testing device of high voltage electrode distance test chamber wall recent distance is greater than 370 mm, 50 kv testing device of high voltage electrode distance test chamber wall recent distance is greater than 250 mm, test even if people touch the walls of the danger.

Mixer equipment to install a separate ground protection.

Protection earthed, mainly is to reduce the sample breakdown when the strong electromagnetic interference on around. Also can avoid the control computer is out of control.

Pieces of the test equipment circuit is equipped with a number of protective measures,

Mainly include: over-current protection, loss of pressure protection, leakage protection, short circuit protection, dc test discharge alarm, etc.

Dc test discharge alarm function: when the dc test equipment to finish, when open the test device will automatically alarm, until the use of the discharge device on the equipment alarm will be automatically cancelled after discharge.

(note: because the dc test after discharge will be dangerous to personal safety, can not directly take electrode, a reminder to use personnel discharge so as not to cause personal injury).

Discharge test device, with the integration to the host, improve the function with separate ever put a pole.